Peter Fontaine Posted May 5, 2014 Report Share Posted May 5, 2014 I have begun the cooling hose routing from the Kenny Brown rotor plates towards the front cooling ducts on my 2010. Due to the rotation of the steering, and the suspension cycling through its normal geometry,I am concerned with the position of the 3” silicone Hose and cable tie points as not to fowel with anything or tear the hose off. I would greatly appreciate any guidance and most of all pictures showing routing and cable tie locations please. regards Peter. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.