Jump to content
TEAM SHELBY FORUM

Help


Carl Reichelt

Recommended Posts

Its an extra 3 piece splitter that can be installed under the existing front splitter. I installed mine last week...easy to follow instructions.

 

Lift car or drive up on ramps. Use 7mm socket to remove the front row retaining screws. Install middle section first, then sides.

Make sure front edges are aligned before final tightening of screws. Some metal edge biter clips can also be installed.

 

Lowers front corners almost 2" so know your curbs, driveways etc.

post-38126-0-65290900-1360695175_thumb.jpg

post-38126-0-65290900-1360695175_thumb.jpg

Link to comment
Share on other sites

Its an extra 3 piece splitter that can be installed under the existing front splitter. I installed mine last week...easy to follow instructions.

 

Lift car or drive up on ramps. Use 7mm socket to remove the front row retaining screws. Install middle section first, then sides.

Make sure front edges are aligned before final tightening of screws. Some metal edge biter clips can also be installed.

 

Lowers front corners almost 2" so know your curbs, driveways etc.

 

 

And don't go anywhere with speed bumps!

 

 

 

Jer

Link to comment
Share on other sites

In trunk of my new 2013 GT 500 convertible I found a box with a black spoiler Or front air dam can anybody tell me what this is do I install this and where ?

 

 

 

Did I ask this question In the wrong area, did I post in the wrong area

New To me thank you all Reply about the spoiler kit again thanks Rick

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...
...