CHEVY2SHELBY Posted June 29, 2012 Report Share Posted June 29, 2012 Hey guys, I have a question concerning wheel and brake fitment. I want to upgrade my front brakes to the SVT Brembo 14" Kit. The wheels that provide clearance have a bacspacing of 6.8", offset of 40-42mm amd the bolt pattern of 5x4.5. The rims i currently have are 20x10 with a backspacing of 6.8", an offset of 35mm and same lug pattern obviously. Do i need spacers to make these fit properly or not??? Link to comment Share on other sites More sharing options...
JeffJ Posted June 29, 2012 Report Share Posted June 29, 2012 Here's a thread where I posted research I did on the 20x10 Razors with the +40 offset. So it all depends on the wheel design. Those should fit, but it will depend. Hope this helps. http://www.teamshelby.com/forums/index.php?/topic/70742-can-anyone-help-with-shelby-razors/page__p__1211179__hl__razor__fromsearch__1&do=findComment&comment=1211179 Link to comment Share on other sites More sharing options...
CHEVY2SHELBY Posted July 3, 2012 Author Report Share Posted July 3, 2012 Ya that helped for sure. Bizarre theyre made differently tho. I guess the only thing to do is purchase them and see if the spoke design of my Boss 338 rims allows enough room.. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.