SNKBITE Posted April 2, 2012 Report Share Posted April 2, 2012 Added it this weekend, and noticed the fans are always running. I would think they would be controlled by a temperature sensor. We installed according to the directions. Is this normal? Link to comment Share on other sites More sharing options...
54First Posted April 2, 2012 Report Share Posted April 2, 2012 It should turn on whenever the H/E pump goes on. Do you have a tune? My VMP tune turns the pump on at about 60 degrees, which means it almost always runs. I don't know about the other tuners. If you don't have a tune, then it sounds like the relay trigger wire is hooked up wrong. It should be spliced into the white wire on the pump motor. Steve Link to comment Share on other sites More sharing options...
SNKBITE Posted April 2, 2012 Author Report Share Posted April 2, 2012 I do have a tune which was installed later in the day, but the fans ran before the tune. The HE was the first thing installed, and we did splice the wire into the white pump wire with the supplied "3 way" connecter. Also, the pump does run at the same time with the fans. Link to comment Share on other sites More sharing options...
3ponies Posted April 2, 2012 Report Share Posted April 2, 2012 Mine run all the time too. Link to comment Share on other sites More sharing options...
SNKBITE Posted April 2, 2012 Author Report Share Posted April 2, 2012 Ok, thanks. I guess it sounds normal..... Link to comment Share on other sites More sharing options...
3ponies Posted April 2, 2012 Report Share Posted April 2, 2012 Ok, thanks. I guess it sounds normal..... I considered a toogle switch set up so I could just turn them on at the track but I didn't do it. Link to comment Share on other sites More sharing options...
leadfoot 5.4 Posted May 5, 2012 Report Share Posted May 5, 2012 My fans kept running too,I thought something was wrong, so i added a toggle switch to turn it off. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.