Jump to content
TEAM SHELBY FORUM

Tanabanana’s new Shelby GT500


Grabber

Recommended Posts

  • 2 weeks later...
  • Replies 275
  • Created
  • Last Reply

Grabber I noticed you have black caps covering the strut bolts in the pics you posted. I was wondering were you got them from. Thanks

 

 

I got them at work from a friend. They are used to go on the ends of all thread so people do not cut themselves.

Link to comment
Share on other sites

Today I finished getting rid of the rear end rust on Tanabanana's butt.

 

Very Sexy looking. :wub:

 

 

 

 

 

 

 

 

 

 

 

030.jpg

 

 

Rob,

You can have my car for awhile and make the rear end nice & black like Tana's

Afterwards, you may even drive it in our wonderful rainy weather if you like

Larry

Link to comment
Share on other sites

Rob,

You can have my car for awhile and make the rear end nice & black like Tana's

Afterwards, you may even drive it in our wonderful rainy weather if you like

Larry

 

This being his second time-he was able to crank it out in two 3 hour days. Now they come painted as they should have. It's nice not having to look at that rust even though one does rarely it is ugly. So glad to have Grabber take care of all of Mrs. Grabbers needs.

Link to comment
Share on other sites

This being his second time-he was able to crank it out in two 3 hour days. Now they come painted as they should have. It's nice not having to look at that rust even though one does rarely it is ugly. So glad to have Grabber take care of all of Mrs. Grabbers needs.

 

:wub:

Link to comment
Share on other sites

  • 1 month later...

2 new mods on the way. Should be here by next Monday or Tuesday.

 

Pic's will be in order on these 2 interior mods.

 

Hint: It looks factory and very clean and is very functional. So far I have only seen one of these in a GT500. Once I saw it....I had to have it, and Tana said "I need that too !" :hysterical:

Link to comment
Share on other sites

2 new mods on the way. Should be here by next Monday or Tuesday.

 

Pic's will be in order on these 2 interior mods.

 

Hint: It looks factory and very clean and is very functional. So far I have only seen one of these in a GT500. Once I saw it....I had to have it, and Tana said "I need that too !" :hysterical:

 

 

Got Tana's new mod installed.

018-2.jpg

 

More details in the attached thread:

http://www.teamshelby.com/forums/index.php/topic/74345-installed-blendmount-for-my-escort-radar-detector/page__view__getnewpost__fromsearch__1

Link to comment
Share on other sites

  • 3 weeks later...

Three (3) mods will be installed on Tana's car for Mothers day. :wub:

 

1. 3M clear bra - Appointment set up for 5/8 (will be using my $200 off coupon that I won at a car show last year)

2. Clutch Drag TSB 10-3-8. 2010 Clutch, flywheel, lube, pilot bearing, Clutch Slave cylinder and new bolts. All parts ordered today and are 3-4 days out.

3. Ford Racing GT500 6-Speed short throw shifter. Ordered today and is 3-4 days out. (this will be installed during the TSB work)

 

Tana's 3 year warranty is up in a couple weeks so I was very happy to get the TSB approved by my dealership. happy%20feet.gif

Link to comment
Share on other sites

That is a really slick mounting system. Very nice. How do you like all the other mods Rob installed? Exhaust sound? The cars are beautiful.

 

LOVE the sound very happy with choice of KR mufflers-The "Fuzz buster" gives me a little room for comfort in opening her up once in a while. We had our first drive together a couple of weeks back, (first time with all my mods) and it was Sweeeeet!

Hope all is well with you and yours.

Link to comment
Share on other sites

Three (3) mods will be installed on Tana's car for Mothers day. :wub:

 

1. 3M clear bra - Appointment set up for 5/8 (will be using my $200 off coupon that I won at a car show last year)

2. Clutch Drag TSB 10-3-8. 2010 Clutch, flywheel, lube, pilot bearing, Clutch Slave cylinder and new bolts. All parts ordered today and are 3-4 days out.

3. Ford Racing GT500 6-Speed short throw shifter. Ordered today and is 3-4 days out. (this will be installed during the TSB work)

 

Tana's 3 year warranty is up in a couple weeks so I was very happy to get the TSB approved by my dealership. happy%20feet.gif

 

Although not excited about my car under going some surgery you made the thought of it easier by ordering me the short throw shifter to be installed while it was opened up. I'm one lucky "wifey" :wub:

Link to comment
Share on other sites

  • 2 weeks later...

Tana has a new a new 3M Clear Bra on her GT500. The installer is in Vancouver WA and I would recommend him. He did a great job. Did the front bumper, all the lights, fender fronts, door cups and door edges, pillars next to windshield and the bottom door entry sill area.

 

001-4.jpg

Link to comment
Share on other sites

Although not excited about my car under going some surgery you made the thought of it easier by ordering me the short throw shifter to be installed while it was opened up. I'm one lucky "wifey" :wub:

 

 

Your car is in good hands with the senior Master Tech and your going to love the short throw shifter. Should be done tomorrow.

021.jpg

022.jpg

023.jpg

Link to comment
Share on other sites

LOVE the sound very happy with choice of KR mufflers-The "Fuzz buster" gives me a little room for comfort in opening her up once in a while. We had our first drive together a couple of weeks back, (first time with all my mods) and it was Sweeeeet!

Hope all is well with you and yours.

 

 

:happy feet: :happy feet:

 

You go, girl!!

Link to comment
Share on other sites

In the last 9 months since I purchased Tana’s GT500 on Aug. 13th 2010 I have done the following mods to the car:

1. Eject button. 0043.jpg

2. Fender stripes. 046-1.jpg

3. Custom plates with Shelby frame. 003-3.jpg

4. Custom shift ball. 042.jpg

5. H-Pipe. 038-2.jpg

6. KR Ford Racing Mufflers. 048-1.jpg

7. Lower Control Arms. 004-6.jpg

8. Ford Racing Cold air intake. 030-4.jpg

9. VMP 2.59 Pulley and tune. 008-4.jpg

10. VMP idler pulley. 014-5.jpg

Link to comment
Share on other sites

....continued.

 

11. Red Fender & Grill wings. 028-5.jpg

12. Bangastang radiator cover. 008-7.jpg

13. Fuse box cover. 032-5.jpg

14. Cobra valve stem caps. 001-2.jpg

15. 3M Clearbra. 001-4.jpg

16. Blendmount radar detector mount & mirror tap with Escort detector. 020-7.jpg

17. Hood shocks. 022-3.jpg

18. Shorty antenna. 002-4.jpg

19. Mirror covers. 006-2.jpg

20. Ford Racing KR short throw shifter. 022.jpg

21. 2010 Ford clutch and flywheel TSB with new pilot bearing and slave cylinder and hydrolic line and bolts. 047.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.


×
×
  • Create New...
...