68Sprite Posted September 29, 2010 Report Share Posted September 29, 2010 I recently purchased the FRPP handling pack for my 07 GT500. I just started installing everything and have the rear done. My question is how are the shocks adjusted? There was no adjustment tool included in the box that contained the shocks and struts. Was this an oversight, or can a small screwdriver be used to make adjustments? There were no instructions in the box either... Thanks for any help. Link to comment Share on other sites More sharing options...
Alloy Snake Posted September 29, 2010 Report Share Posted September 29, 2010 It should have come with a small hex wrench with an aluminium handle,You adjust them at the very top-If you cant find the tool use an allen wrench. Link to comment Share on other sites More sharing options...
GO-SVT Posted September 29, 2010 Report Share Posted September 29, 2010 On mine, the tool was in the plastic envelope with the instructions... Link to comment Share on other sites More sharing options...
JimC Posted September 29, 2010 Report Share Posted September 29, 2010 If possible could someone post the instructions? Link to comment Share on other sites More sharing options...
Rag Top Day Posted September 29, 2010 Report Share Posted September 29, 2010 Here you go. Link to comment Share on other sites More sharing options...
gr8snkbite Posted September 29, 2010 Report Share Posted September 29, 2010 check your packaging real good. mine was loose and found wedged in between the corner folds... Link to comment Share on other sites More sharing options...
68Sprite Posted September 30, 2010 Author Report Share Posted September 30, 2010 Thanks everybody for your help.... Gr8snkbite, you are the winner.... I went back and tore everything down and sure enough at the bottom of one fo the end-folds was a clear plastic envelope with instructions and the adjusting tool. Sorry for the mistake, but again I appreciate everyone's response! Link to comment Share on other sites More sharing options...
gr8snkbite Posted September 30, 2010 Report Share Posted September 30, 2010 glad you got it.... now where's meh prize......... Link to comment Share on other sites More sharing options...
Joe G Posted October 1, 2010 Report Share Posted October 1, 2010 now where's meh prize......... He says wait for it.... Link to comment Share on other sites More sharing options...
tee2 Posted October 3, 2010 Report Share Posted October 3, 2010 could you use these shocks/dampers with the cobra jet drag racing spring package and be able to adjust them to work effectively at the drag strip? i have the same frpp package and was wondering if the cj springs would help/ Link to comment Share on other sites More sharing options...
waihona Posted October 8, 2010 Report Share Posted October 8, 2010 Thanks everybody for your help.... Gr8snkbite, you are the winner.... I went back and tore everything down and sure enough at the bottom of one fo the end-folds was a clear plastic envelope with instructions and the adjusting tool. Sorry for the mistake, but again I appreciate everyone's response! do you have the hangling pack on now? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.