Jump to content
TEAM SHELBY FORUM

New Mods + Dyno Run Video


crazy4life

Recommended Posts

Just added a L&M Throttle body, plenum and a 10% overdrive lower pulley. I also port matched the plenun to the supercharger. Took about 20 minutes with a die grinder and metal bit. Also added ARH long tubes and roush extreme exhaust a month ago. Jon lund will tune the car on wednesday and I am curious to see what the gains will be. Baseline tune was by Jon about 5 months ago. It put down 525 HP on a mustang dyno with the Evo stage 2 and tuning by Jon. Also changed the plugs and the oil. Used the NGK TR6 Iridium gapped @.030 per Jon. Can't wait till Wednesday. Hoping for 50 HP gain.

 

Had car tuned by Jon Lund this morning and picked up 35 HP and a whooping 55 FT/LBS of torq. All these runs are on a Mustang Dyno. Final Numbers where 552 HP and 536 TQ. Also boost was @ 14.386 lbs and before the longtubes,10% overdrive pulley and port matching the plenum the boost was 12.328 lbs

 

Here is the Dyno Run

Dyno Run

 

Dyno Sheet before mods

Dyno run 1

 

After mods

Dyno 2

Link to comment
Share on other sites

Nice numbers!

 

Any chance you could scan that in darker?

 

I had to do a copy of my dyno sheed (making it darker, color copier) then scan it in to get everything dark enough for me.

 

Just a thought

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...
...