Budman340 Posted June 3, 2009 Report Share Posted June 3, 2009 Hi all!!!!!!! Here are a couple of pics of the new SGT/SC certificate and engine plate. Your VIN#, CSM# and year of vehicle will be printed on it. When you get the plate, there will also be two rivets included. The plate can be put on where you like it. The price for the kit is $29.00. If your vehicle was built here at Shelby, we will have your information to verify the build. If your vehicle was done at Tasca or Quantum or Shawn Hyland Motorsports, we will need you to fax or email a copy of the work order to us. This is only for the SGT's that were done at an Authorized Mod Shop. Steve Mansel is now going to take the orders for the kits. Info needed 1. Name and address 2. VIN# and CSM# and year of vehicle 3. If the vehicle was not done here but at the above listed Authorized Mod Shops, please fax or email a copy of the work order to 702-952-1021 or email to Steve at Steve's email address. Thanks!!!! Bud Link to comment Share on other sites More sharing options...
Carl Bishop Posted June 4, 2009 Report Share Posted June 4, 2009 Man that is sweet, I hope y'all use the same certificate format for us plan ol' SGT owners. Link to comment Share on other sites More sharing options...
Doug_GT350 Posted June 4, 2009 Report Share Posted June 4, 2009 Hey Bud, since I'm in the final stages of setting my install up at Tasca, can they send/fax all the info to you to get it started or is it up to me? Also in earlier post I saw where Amy said something about all plaques will be on the left side of the radiator support, located with a template. If so will the template be sent also? Just asking. Thanx Link to comment Share on other sites More sharing options...
NordicShelby Posted June 4, 2009 Report Share Posted June 4, 2009 nice Link to comment Share on other sites More sharing options...
mywickedshelby Posted June 4, 2009 Report Share Posted June 4, 2009 Now that should make alot of folks very happy, great work SAI! Link to comment Share on other sites More sharing options...
mikewheels Posted June 4, 2009 Report Share Posted June 4, 2009 Time to call Tasca! :happy feet: Congrats to Roger for getting your name on there and securing your place in Shelby history now. Cool! Link to comment Share on other sites More sharing options...
Doug_GT350 Posted June 4, 2009 Report Share Posted June 4, 2009 Time to call Tasca! Hey Mike ask Dennis if we can get a group rate!!!! I'm waiting for my reply as I type! Link to comment Share on other sites More sharing options...
William Rodgers Posted June 4, 2009 Report Share Posted June 4, 2009 Nice, I can not wait to get mine!!!!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
Doug_GT350 Posted June 4, 2009 Report Share Posted June 4, 2009 Nice, I can not wait to get mine!!!!!!!!!!!!!!! looks like ya got one on 3-29-09?!?!? If ya didn't get in on the group rate! :happy feet: Link to comment Share on other sites More sharing options...
William Rodgers Posted June 4, 2009 Report Share Posted June 4, 2009 looks like ya got one on 3-29-09?!?!? If ya didn't get in on the group rate! :happy feet: I meant I can not wait to get my Certificate and Plate.......... :happy feet: :happy feet: Link to comment Share on other sites More sharing options...
Hardluck33 Posted June 4, 2009 Report Share Posted June 4, 2009 Looks great. Why do we have to send in our information if they were done at Tasca or Quantum--we should be in the registry are we not? Quantum and Tasca should be the ones reporting that information to you. Link to comment Share on other sites More sharing options...
kahmann Posted June 5, 2009 Report Share Posted June 5, 2009 Man that is sweet, I hope y'all use the same certificate format for us plan ol' SGT owners. +1 <_< Link to comment Share on other sites More sharing options...
RogerS Posted June 5, 2009 Report Share Posted June 5, 2009 We are standardizing all of our certificates and certificate programs. Link to comment Share on other sites More sharing options...
Hardluck33 Posted June 7, 2009 Report Share Posted June 7, 2009 Has anyone heard back from Steve????? Link to comment Share on other sites More sharing options...
clark17357 Posted June 7, 2009 Report Share Posted June 7, 2009 Has anyone heard back from Steve????? I sure have not. Jim Link to comment Share on other sites More sharing options...
Budman340 Posted June 8, 2009 Author Report Share Posted June 8, 2009 Hi all!!!!!! I have included a couple of pictures of some places where you could install the plate. In pic 1, you can see where Roger has his. If you put it there, you will run into the same issue--the radiator cover covers it up a bit. I would not recomend to put it on the strut tower. The radius is too much and the plate WILL NOT bend to the curvature of the tower--it WILL kink. Plus, the tower is double walled. Pic 1. Passenger side radiator top support Pic 2. Passengers side firewall--could be an issue. I do not know what's behind it if you drill into it. Pic 3. Drivers side fender area. This could go on the frame rail part--not the actual fender. Pic 4. Fuse box cover. Could be cool, but could also easily be stolen too. Bud Link to comment Share on other sites More sharing options...
Doug_GT350 Posted June 8, 2009 Report Share Posted June 8, 2009 Hi all!!!!!! I have included a couple of pictures of some places where you could install the plate. In pic 1, you can see where Roger has his. If you put it there, you will run into the same issue--the radiator cover covers it up a bit. I would not recomend to put it on the strut tower. The radius is too much and the plate WILL NOT bend to the curvature of the tower--it WILL kink. Plus, the tower is double walled. Pic 1. Passenger side radiator top support Pic 2. Passengers side firewall--could be an issue. I do not know what's behind it if you drill into it. Pic 3. Drivers side fender area. This could go on the frame rail part--not the actual fender. Pic 4. Fuse box cover. Could be cool, but could also easily be stolen too. Bud Personally I like no. 1 since you gave reasons not to use the other 3. also as Hardluck stated......Why do we have to send in our information if they were done at Tasca or Quantum--we should be in the registry are we not? Quantum and Tasca should be the ones reporting that information to you. will the shops (Tasca, Quantum....) have these plates for the new installs, or do we still need to get them from SAI? Thanks for the great work Bud!!! Link to comment Share on other sites More sharing options...
NordicShelby Posted June 8, 2009 Report Share Posted June 8, 2009 We don't need no stinkin badges :devil: Link to comment Share on other sites More sharing options...
Budman340 Posted June 8, 2009 Author Report Share Posted June 8, 2009 Personally I like no. 1 since you gave reasons not to use the other 3. also as Hardluck stated......Why do we have to send in our information if they were done at Tasca or Quantum--we should be in the registry are we not? Quantum and Tasca should be the ones reporting that information to you. will the shops (Tasca, Quantum....) have these plates for the new installs, or do we still need to get them from SAI? Thanks for the great work Bud!!! The main reason for sending us the info is, we do not have it yet. Yes, the shops should be sending the info to us and they could be. But when you are working on something like 30,000 cars+, it will take too much time to go through the info to find it. They registry is still being put together. Once it is, then it would be a bit easier to find. And all of the plates and certs will be purchased from here. That is why the cert says that "Shelby verified it". We will verify everything that comes in for these kits. Plus when we are sent the copy of the work order, it makes it alot easier to verify and if the shop did not send us the info, we can then make sure it goes into right into the registry too Bud Link to comment Share on other sites More sharing options...
Doug_GT350 Posted June 9, 2009 Report Share Posted June 9, 2009 The main reason for sending us the info is, we do not have it yet. Yes, the shops should be sending the info to us and they could be. But when you are working on something like 30,000 cars+, it will take too much time to go through the info to find it. They registry is still being put together. Once it is, then it would be a bit easier to find. And all of the plates and certs will be purchased from here. That is why the cert says that "Shelby verified it". We will verify everything that comes in for these kits. Plus when we are sent the copy of the work order, it makes it alot easier to verify and if the shop did not send us the info, we can then make sure it goes into right into the registry too Bud Okie Dokie makes sense. You'll have mine next month hopefully! Knowing me I'll send all the wrong stuff and it will take two years to straighten out..... I have a lot of faith in myself! Link to comment Share on other sites More sharing options...
SWEDEMAN Posted June 10, 2009 Report Share Posted June 10, 2009 Roger doing the certificate in holograms is very smart and daunting to replicate, good job. I also want to give Amy kudos for finding excellent talent and being able to keep it. I would have expected nothing less~ Dave EDITED: Link to comment Share on other sites More sharing options...
SGT/SC#0471 Posted June 10, 2009 Report Share Posted June 10, 2009 Thanks guys!!!!! Link to comment Share on other sites More sharing options...
RogerS Posted June 11, 2009 Report Share Posted June 11, 2009 Steve has begun contacting for payment. Roger Link to comment Share on other sites More sharing options...
William Rodgers Posted June 11, 2009 Report Share Posted June 11, 2009 Steve has begun contacting for payment. Roger Yes he has Roger, he contacted me yesterday. Great stuff, now I just have to fax over the documents and I am all set. Thank you Roger Link to comment Share on other sites More sharing options...
sgt2343 Posted June 11, 2009 Report Share Posted June 11, 2009 Yes he has Roger, he contacted me yesterday. Great stuff, now I just have to fax over the documents and I am all set. Thank you Roger Sent my documents yesterday to. Link to comment Share on other sites More sharing options...
Budman340 Posted June 11, 2009 Author Report Share Posted June 11, 2009 Hi all, The ones that have been turned in and paid for I have. I will have the shipping dept part start sending these out today/tommorrow. Thanks!!!!!!! Bud Link to comment Share on other sites More sharing options...
wmoore Posted June 11, 2009 Report Share Posted June 11, 2009 Hi all, The ones that have been turned in and paid for I have. I will have the shipping dept part start sending these out today/tommorrow. Thanks!!!!!!! Bud I have sent my information to Steve but, how do I pay? I have a credit card in my hand...just let me know. Link to comment Share on other sites More sharing options...
Budman340 Posted June 11, 2009 Author Report Share Posted June 11, 2009 I have sent my information to Steve but, how do I pay? I have a credit card in my hand...just let me know. If you trust email, you can email him the CC#'s or call Steve at 702-942-7325 ext 139 Bud Link to comment Share on other sites More sharing options...
wmoore Posted June 11, 2009 Report Share Posted June 11, 2009 If you trust email, you can email him the CC#'s or call Steve at 702-942-7325 ext 139 Bud The phone call and payment have been made....Thanx Link to comment Share on other sites More sharing options...
clark17357 Posted June 12, 2009 Report Share Posted June 12, 2009 If you trust email, you can email him the CC#'s or call Steve at 702-942-7325 ext 139 Bud Hey Bud, I e-mailed Steve that I am uncomfortable putting credit card info in an e-mail. I trust you guys but that e-mail can pass through any number of servers where it can be retrieved. I asked him if I can send a check. Waiting for a response. Jim Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.