Gdub Posted May 10, 2008 Report Share Posted May 10, 2008 Has anyone experianced sealing problems when the window is all the way up? My drivers side window sits out flush with the door trim at the top while the passenger side sits in the channel about 3/8ths of an inch in from the top door trim. Ford replaced the rubber seal but the window still sits out too far. I am wondering if the regulator and frame in the door is bent which doesnt allow the window to curve in enough at the top when in the upright position. Any help on this would be appreciated. gdub Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.