Jump to content
TEAM SHELBY FORUM

Can't find wheels for GT500 ?


scottma

Recommended Posts

All the sites I look at only have a few wheels for the GT500. I would really like to find a deep dish bullet wheel like the ones I put on my o5 GT. Where can I look for wheels specifically for the GT500 and know that they will fit? I want 18X10 all around and they seem few and far between.

Link to comment
Share on other sites

  • 2 weeks later...
All the sites I look at only have a few wheels for the GT500. I would really like to find a deep dish bullet wheel like the ones I put on my o5 GT. Where can I look for wheels specifically for the GT500 and know that they will fit? I want 18X10 all around and they seem few and far between.

 

 

Ignore . See next post

Link to comment
Share on other sites

Here are a few pictures of what I had built for my GT500. Won't be seeing these on too many Shelby's, I hope! The fronts are 19 x 9.5 running 255/40/19 and the rears are 19 x 10.5 running 285/35/19 Michellin Pilot Sport 2's all around.

 

The wheels are a two piece lightweight racing wheel. For more info contact me. The tires are excellent with the best grip available for tires in this size. I have tried them all. I had my fastest lap times with the PS2's by far. Although off the line starts are still a wheel spinning money burning event as this car has just no grip at all from a dead start street race. Rolling starts are still a bit of a smoke fest, but never the less the car grips better when starting from a rolling situation.

post-9277-1191778208_thumb.jpg

post-9277-1191778224_thumb.jpg

post-9277-1191778238_thumb.jpg

post-9277-1191778253_thumb.jpg

post-9277-1191778575_thumb.jpg

post-9277-1191778208_thumb.jpg

post-9277-1191778224_thumb.jpg

post-9277-1191778238_thumb.jpg

post-9277-1191778253_thumb.jpg

post-9277-1191778575_thumb.jpg

Link to comment
Share on other sites

All the sites I look at only have a few wheels for the GT500. I would really like to find a deep dish bullet wheel like the ones I put on my o5 GT. Where can I look for wheels specifically for the GT500 and know that they will fit? I want 18X10 all around and they seem few and far between.

 

 

click here

 

http://shelbyperformanceparts.com/ListItem...eel/Page/2.aspx

 

for the shelby catalog page which has 3-pc custom made GT40 rims that can & specify the rim off-set. prices start at $1099.99 - $1,339.99 & as big as 22"

Link to comment
Share on other sites

  • 3 months later...

Check these out. http://www.carrollshelbywheels.com/cs69.htm Available in 18x.5 inches and they are

 

 

 

The 69s are the only Shelby wheels that will clear the Brembos in an 18" size. They are a modernized version of the Magnum 500. There is a dealer in Ohio that sells on eBay and you can get these in black....matte...or chrome. The most expensive is chrome and it's about $1400 for the set on their site.

 

I'm really bummed that they don't make the 66s or 67s in 18s that will fit. They're not going to make them according to Shelby wheels. I can't bring myself to go through the handling and harshness of 20s, so I'll stick with these butt ugly originals.

 

bj

Link to comment
Share on other sites

The site says these fit the GT500??????

 

http://www.carrollshelbywheels.com/specs.htm

 

http://www.carrollshelbywheels.com/cs69.htm

 

http://www.carrollshelbywheels.com/cs66.htm

 

I'll all over the chrome cs66 in 18's if they do fit!!

 

Better check first, don't think the 18"s will clear the front brakes.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...
...