Performance Shift Indicator

[Shelby.GT500]

What RPMs are you guys setting the Performance Shift Indicator to? Just curious to what everyone would recommend them to.

 

Thanks!

[Torched10]

What RPMs are you guys setting the Performance Shift Indicator to? Just curious to what everyone would recommend them to.

 

Thanks!

 

i use 5800--and i never hear the chime--i look for the SVT logo to light up--really cool after dark too

[Shelby.GT500]

Torch, thanks for your input! :happy feet:

[11ShelbyGT500]

What RPMs are you guys setting the Performance Shift Indicator to? Just curious to what everyone would recommend them to.

 

Thanks!

 

+1

[08 ORANGE SS-725HP]

6000 rpm's. Just program the light with NO tone. Won't hear it @ WOT anyway

[rkalish]

Bit of a different topic, but I cannot get the shift rpm to change from

the default. I set the shift light on, but the value will not move no matter

which of the two buttons I hit. Does anyone else have that problem.

Thanks

[Torched10]

Bit of a different topic, but I cannot get the shift rpm to change from

the default. I set the shift light on, but the value will not move no matter

which of the two buttons I hit. Does anyone else have that problem.

Thanks

 

i remember having the same issue---had to follow the manual directions exactly--bob

[2011 P8J]

I think the shift light is usless as tits on a boared hog. I wish the tone was louder because that would have been perfect. I had an 87 RX7 and when it hit redline a very loud beep would let you know. My Aeroforce guage has a shift light that works so much better than the stock light.

[bigsnake]

Bit of a different topic, but I cannot get the shift rpm to change from

the default. I set the shift light on, but the value will not move no matter

which of the two buttons I hit. Does anyone else have that problem.

Thanks

 

 

Maybe this will help.

 

 

Performance shift indicator

Your vehicle is equipped with a programmable performance shift

indicator. When activated, this feature provides a visual (SHIFTLAMP)

and/or audible (SHIFTTONE) cue to shift to the next highest gear at an

engine rpm specified by the driver.

The SHIFTLAMP feature uses the SVT logo on the tachometer to notify

you when the desired shiftpoint is reached. The SVT symbol is backlit in

red under normal driving conditions (SHIFTLAMP OFF). When the

SHIFTLAMP is set to ON, the red backlighting is turned off and the SVT

logo will turn bright orange when the desired shift point is reached.

The SHIFTTONE feature uses an audible tone to notify you when the

desired shiftpoint is reached.

SHIFTLAMP and SHIFTTONE can be used separately, together, or

turned off completely.

To use the performance shift indicator feature, first bring the vehicle

to a complete stop then use the message center controls as follows:

Note: The vehicle's headlamps or park lamps must be on to

perform/check light functions.

1. Press SETUP repeatedly until

PRESS RESET TO SET

SHIFTPOINT appears in the display.

2. Press RESET to choose between

SHIFTLAMP ON/OFF. Press SETUP

when finished.

3. Press RESET to choose between

SHIFTTONE ON/OFF. Press SETUP

when finished.

4. Press and hold INFO to lower the

desired SHIFTPOINT in increments

of 100 rpm.

 

5. Press and hold RESET to raise

the desired SHIFTPOINT in

increments of 100 rpm.

Note: The SHIFTPOINT can be adjusted from 1,500-6,500 rpm.

The performance shift indicator feature functions independently of the

fuel economy upshift indicator . The upshift indicator will still

illuminate when it is best to shift to the next highest gear to maximize

fuel economy regardless of the performance shift indicator settings.

[mmolzahn]

Bit of a different topic, but I cannot get the shift rpm to change from

the default. I set the shift light on, but the value will not move no matter

which of the two buttons I hit. Does anyone else have that problem.

Thanks

 

 

I don't think you can change it while you are driving. You have to be stopped.