Shelbygolfpro Posted August 16, 2018 Report Share Posted August 16, 2018 Hey guys, I am having some misreading's on my oil gauge. I have the Shelby GT/Super Snake gauge pod set and it has been installed since last September. I haven't had any issues with it previously but in the last week the gauge only seems to be working if RPMs are over 1500. There are no death knocking sounds that are happening or other weird behavior when the gauge is showing 0psi under 1500rpm, so I am sure the car is running fine it is just the gauge. I am going to try to fiddle with it again this afternoon but was just wondering if any other owners have had this issue and know what the fix is. I am assuming it is something small, just not sure what to look for. Thanks in advance! Link to comment Share on other sites More sharing options...
Don Johnston Posted August 17, 2018 Report Share Posted August 17, 2018 Sounds like the sending unit might be the problem, not the gauge. Link to comment Share on other sites More sharing options...
andrewnagle1964 Posted August 17, 2018 Report Share Posted August 17, 2018 11 hours ago, 66GT350PS said: Sounds like the sending unit might be the problem, not the gauge. agreed, cheap and easy to replace Link to comment Share on other sites More sharing options...
Dan Espejo Posted August 17, 2018 Report Share Posted August 17, 2018 Check the wire crimps contacts. My fuel pressure gauge would work then sometimes the needle would go all the way to the right side. I replaced the sender but it turned out to be the crimp connection was bad. Link to comment Share on other sites More sharing options...
Shelbygolfpro Posted August 19, 2018 Author Report Share Posted August 19, 2018 Cool, thanks for the input guys. I will check into it! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.