roblectric Posted July 27, 2013 Report Share Posted July 27, 2013 I installed a Moroso PS reservoir to replace the old plastic one. Common sense tells me I need to bleed the system. Then again, if any bubbles stayed at the top of the hose, wouldnt they have risen back to the reservoir when I put fluid in to fill the tank? I have not started the car since the fluid top off.Suggestions? Thanks. Link to comment Share on other sites More sharing options...
zachman Posted July 27, 2013 Report Share Posted July 27, 2013 Open the cap and start your car, then turn your steering wheel full left and then right. Should bleed out the system. Link to comment Share on other sites More sharing options...
roblectric Posted July 27, 2013 Author Report Share Posted July 27, 2013 Thanks Dave. Was hoping that would be all I needed to do. Link to comment Share on other sites More sharing options...
zachman Posted July 27, 2013 Report Share Posted July 27, 2013 That will do it. Glad to help. Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.