2012SILVERGT500 Posted August 22, 2012 Report Share Posted August 22, 2012 Yes, I see the youtube for the 2008, but 2012 is vastly different. Link to comment Share on other sites More sharing options...
Snoopy49 Posted August 22, 2012 Report Share Posted August 22, 2012 Try this link. You will have to register to download the installation manuals. Link to comment Share on other sites More sharing options...
2012SILVERGT500 Posted August 23, 2012 Author Report Share Posted August 23, 2012 Like everything else, The PDF and all the videos are showing 07-08, and the install on the 12 is quiet different, but Thanks. I have it in and plumbed up and will start it in the morning to check for leaks then start the wiring. Link to comment Share on other sites More sharing options...
MLIBRIZZI Posted August 25, 2012 Report Share Posted August 25, 2012 Hello, I installed this same heat exchanger on my 2012 GT500. I used the youtube video "INSTALLING AFCO HEAT EXCHANGER". Yes it is an older GT500, but there is nothing different on the install except the bolts being removed from the side coners of the front bumper. The 2012 bumper is held in by the three screws in front of the tires. The bumper will just pull off after you have removed all six screws and the lower skid plate. You will not re-use the factory mounting bracket that holds in the heat exchanger. Other wise the older install video is the same. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.