sgt1864 Posted July 9, 2012 Report Share Posted July 9, 2012 I am posting this to let everyone know the you do not have to use the PIAA lights with this kit. I purchased light off Ebay the work great. The mounting was a bear to work out but I got it and they work great and match the headlight. The light cost me $44 for 2 plus shipping and about $30 for hardware & wire plugs to mount plus the $49 for the bezels from Shelby. Had a problem get them to light up at first then found out you need the key on for the fog light to work, go figure. The light have a wheel adjustment to set the lights hight, real nice. Going to change the bulbs to Silverstars or HID in the future, also the headlights. Going to Myrtle Beach this weekend for Mustang Week Starting next Tuesday through Saturday, that will be a good test to see how the lights work on the road. Having a problem post all the photos, will get it worked out and post. ] Link to comment Share on other sites More sharing options...
tbarb169 Posted July 9, 2012 Report Share Posted July 9, 2012 Looks good! Link to comment Share on other sites More sharing options...
SGT0128 Posted July 9, 2012 Report Share Posted July 9, 2012 Nice work. Link to comment Share on other sites More sharing options...
Glenn Greenwell Posted July 10, 2012 Report Share Posted July 10, 2012 I wish there was another factory looking mount solution to install some driving lights, I sure would like a set of some type. GG Link to comment Share on other sites More sharing options...
FordRocks1 Posted July 10, 2012 Report Share Posted July 10, 2012 Fantastic job! Any other pics without the lights on and close ups, I'd like to see how flush it sits with the honeycomb inserts. Link to comment Share on other sites More sharing options...
sgt1864 Posted July 10, 2012 Author Report Share Posted July 10, 2012 I installed the lights with the Shelby fog light/brake duct bezels not using the honnycone panels. Link to comment Share on other sites More sharing options...
slbgtsc Posted July 10, 2012 Report Share Posted July 10, 2012 Looks great where did you get the aluminum "L" brackets? Link to comment Share on other sites More sharing options...
sgt1864 Posted July 10, 2012 Author Report Share Posted July 10, 2012 Got the flat and angle aluminum at Home Depot. Wanted to fab the bracket out of one piece 1/8 flat aluminum sheet but could not find any around me. I think this setup is stronger, the lights only have 1stub to the frame supporting them and there is no movement at all to them. Link to comment Share on other sites More sharing options...
Redlinetoys Posted July 11, 2012 Report Share Posted July 11, 2012 Your setup looks great. I have seen those Valeo fog lights. They appear to be factory installed in multiple different brand cars from the factory and they are really a pretty nice piece. Thanks for posting the photos and info! Link to comment Share on other sites More sharing options...
peter301 Posted July 11, 2012 Report Share Posted July 11, 2012 Looks really great!!!! What model are the Valeo's? I am trying to find them as we speak, I have the bezzals but haven't had much luck with finding the right lights... Thanks, Peter Link to comment Share on other sites More sharing options...
sgt1864 Posted July 11, 2012 Author Report Share Posted July 11, 2012 I purchased them from SAE-AUTO on eBay. The number on the back of the light is 89210434 & PBT-ASA-6F30. These lights fit most new Ford cars. Don't quote me on this but I thing they are the same lights on the 07/08 GT500. If you need the light sockets to wire them up they are Dorman #84783 H8/H11 (pepboys or autozone). Hope this helps Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.