Jump to content
TEAM SHELBY FORUM

Couldn't Be any more excited!


sgt1020

Recommended Posts

Well, its Wednesday night. Only 4 more days until my SGT goes to JDM Engineering for the work to be done (It's all in my Signature). Should be done by Wednesday of next week. I'll keep you guys posted with pics and videos. Stay tuned! :happy feet: :happy feet: :happy feet: :happy feet: :happy feet:

Link to comment
Share on other sites

Well, its Wednesday night. Only 4 more days until my SGT goes to JDM Engineering for the work to be done (It's all in my Signature). Should be done by Wednesday of next week. I'll keep you guys posted with pics and videos. Stay tuned! :happy feet: :happy feet: :happy feet: :happy feet: :happy feet:

 

I'm sure you're excited about the new mods, hopefully you'll be pleased with the results.

 

BTW, I noticed this line in your sig...

 

 

"-Shelby Signed Sun Visor (+100hp)

I was not aware of the HP gains as a result of his signature... that made my day! rockon.gif

-Pockdog

Link to comment
Share on other sites

Well, its Wednesday night. Only 4 more days until my SGT goes to JDM Engineering for the work to be done (It's all in my Signature). Should be done by Wednesday of next week. I'll keep you guys posted with pics and videos. Stay tuned! :happy feet: :happy feet: :happy feet: :happy feet: :happy feet:

 

 

I say 4.10 gears it works real nice with those cams !!!

Link to comment
Share on other sites

Staying with 3.73s my friend. 4.10s are a bit too much. I think the 3.73s are a better all around gear. Also, I don't know about a base line dyno run. It's 200 a dyno pull at JDM. Not sure If i want to spend that. I know the car stock right now is around 275 at the wheels and 300ftlbs. I've seen a bunch of other SGT dyno pulls stock and they are right around that number, so I mean I have a good idea of where the car is at now in terms of power. Any one else dyno their SGT stock? Whatever your numbers were, mine will be extremely close if not the same!

 

And yes I will keep you guys posted! Will be putting up a new video on my youtube channel once it is done as well! :banvictory::rockon::shift:

Link to comment
Share on other sites

Staying with 3.73s my friend. 4.10s are a bit too much. I think the 3.73s are a better all around gear. Also, I don't know about a base line dyno run. It's 200 a dyno pull at JDM. Not sure If i want to spend that. I know the car stock right now is around 275 at the wheels and 300ftlbs. I've seen a bunch of other SGT dyno pulls stock and they are right around that number, so I mean I have a good idea of where the car is at now in terms of power. Any one else dyno their SGT stock? Whatever your numbers were, mine will be extremely close if not the same!

 

And yes I will keep you guys posted! Will be putting up a new video on my youtube channel once it is done as well! :banvictory::rockon::shift:

 

 

 

Wow, $200 a dyno run. Seems very steep. I have heard $90 a run but never much higher. Good luck with your mods.

Link to comment
Share on other sites

No your car is white the white cars have about 8-12 more hp per car. :hysterical: So you'll have to get your car dyno'd! :hysterical:

 

 

You're SO right!!!!! :hysterical2::hysterical2::hysterical::hysterical::hysterical::hysterical::hysterical:

 

 

 

But seriously, it's true. We aint called "Performance White" for nothin'! :yup::banvictory: :shades:

Link to comment
Share on other sites

Well It's done. Picking it up Friday. Go to my youtube page, there is a teaser video of my car at JDM.

JDM has a dyno jet, but use heavier rollers thus giving the same numbers a Mustang Dyno would (Mustang Dynos give lower numbers) A regular dyno jet would have given a 10-15hp higher reading. Honestly numbers don't mean that much to me, it's all about how you drive it! :happy feet:

If you have a youtube account feel free to add or subscribe. More videos to come.

 

www.youtube.com/shelbygt1020

 

* Oh and BTW, the V6/Bullitt Brace clears the manifold as you can see in the video. Ford Racing was wrong.

http://www.youtube.com/watch?v=kGduLmNL2tY

Link to comment
Share on other sites

So! How do you like the changes? I would like to know more on how the cams sound through the KR's?? How does the car feel? Big change?

 

 

Down low, it moves but it REALLY likes the high rpms! Doesn't like to be below 1800rpms. The cams sound unbelievable and the car is so incredibly loud when you get on it. It not only is extremely loud, but sounds SO mean. I'm in love. The nice thing is, when you cruise the car is decently mild in terms of how loud it is. But man the thing pulls hard, strong and screams with a sound that says don't F**k with me! It truly sounds menacing. I have a video of the car, but the sound of the video does the sound ZERO justice. In person this thing sounds awesome. As far as power goes, the car has a lot more power. Get the rpms to 3500, pin it and your head hits the headrest. If any of you guys are thinking about doing what I did, DO IT. You will not regret it! I'll put a video up this weekend.

 

Never heard cams in a KR. Guess you would be the first?

Link to comment
Share on other sites

 

 

^ I would imagine my car would have showed the same numbers or at least very close to the same.

 

 

 

That's my Betsy!!!!

 

Very nice. I love the sound at WOT!. Is your rev limiter bumped up? What was the max RPM in your vid?

Sweet ride. Congrats!

Link to comment
Share on other sites

That's my Betsy!!!!

 

Very nice. I love the sound at WOT!. Is your rev limiter bumped up? What was the max RPM in your vid?

Sweet ride. Congrats!

 

 

I suppose it was max RPM in the vid, but my rev limiter is at 7000 now. Also I put up another video on my youtube if you want to check it out. www.youtube.com/shelbygt1020

 

And thanks!!!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...
...