shane42 Posted February 15, 2011 Report Share Posted February 15, 2011 I have seen others widen the 20" Alcos up to 12" to fit a 335 tire, but has some mods to fit the wheel. A 315 tire will fit a 10.5" wheels, has anyone tried this? Thanks, Shane Quote Link to comment Share on other sites More sharing options...
dbowles22 Posted February 15, 2011 Report Share Posted February 15, 2011 Bigger Rear Tires Theres some info in there about 315s on 10.5 in wheels. Its somewhere in the 18 pages Quote Link to comment Share on other sites More sharing options...
Taj2010 Posted February 15, 2011 Report Share Posted February 15, 2011 I have seen others widen the 20" Alcos up to 12" to fit a 335 tire, but has some mods to fit the wheel. A 315 tire will fit a 10.5" wheels, has anyone tried this? Thanks, Shane I just got my matte black alcoas widened to 113/4 and put a 315 30 20 toyo r888 tire on,these thing are huge they measure 13 1/16 wide side wall to side wall. they fit flush with the rear fender outside lip. 10 1/2 inches is not going to work with the alcoas . they may work with the nitto 315 35 20 that only measure 12.4 inches wide but are close to 28 3/4 tall. the toyo 315 30 20 specs say 12 1/2 wide but they measure 13 1/16 on my 11 3/4 wheels. Quote Link to comment Share on other sites More sharing options...
SVTSnake Posted February 16, 2011 Report Share Posted February 16, 2011 I just got my matte black alcoas widened to 113/4 and put a 315 30 20 toyo r888 tire on,these thing are huge they measure 13 1/16 wide side wall to side wall. they fit flush with the rear fender outside lip. 10 1/2 inches is not going to work with the alcoas . they may work with the nitto 315 35 20 that only measure 12.4 inches wide but are close to 28 3/4 tall. the toyo 315 30 20 specs say 12 1/2 wide but they measure 13 1/16 on my 11 3/4 wheels. How bout some pics?! Sounds really nice...I want the Black Alcoas Quote Link to comment Share on other sites More sharing options...
Taj2010 Posted February 16, 2011 Report Share Posted February 16, 2011 How bout some pics?! Sounds really nice...I want the Black Alcoas I'll try to get some pics this weekend. Thanks Tom Quote Link to comment Share on other sites More sharing options...
shane42 Posted February 17, 2011 Author Report Share Posted February 17, 2011 I just got my matte black alcoas widened to 113/4 and put a 315 30 20 toyo r888 tire on,these thing are huge they measure 13 1/16 wide side wall to side wall. they fit flush with the rear fender outside lip. 10 1/2 inches is not going to work with the alcoas . they may work with the nitto 315 35 20 that only measure 12.4 inches wide but are close to 28 3/4 tall. the toyo 315 30 20 specs say 12 1/2 wide but they measure 13 1/16 on my 11 3/4 wheels. I looked on the Toyo website and the approved rim width is 10.5 - 11.0- 11.5 When you post your pics I'll take a look Shane Quote Link to comment Share on other sites More sharing options...
breoland Posted February 27, 2011 Report Share Posted February 27, 2011 I looked on the Toyo website and the approved rim width is 10.5 - 11.0- 11.5 When you post your pics I'll take a look Shane depending on the offset of the wheel you could probably get away with using a 10.5 or 11, but with the alcoa, the offset leaves the wheel at the very edge of the fender lip and any kind of tire bulge would cause it to rub. there are a few good reads about it in the supersnake section Quote Link to comment Share on other sites More sharing options...
trob_17 Posted April 14, 2011 Report Share Posted April 14, 2011 I'll try to get some pics this weekend. Thanks Tom Any pics yet? Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.