Revan Racing Posted August 30, 2009 Report Share Posted August 30, 2009 Pun intended. As many of you know the dual puller fan Shelby Heat Exchanger pulls over 1,400 CFM that blows directly on the bottom of the A/C Condenser. I've had a number of people comment to me that their A/C gets very cold much quicker after installation. I too have noticed that my A/C gets cooler much faster. Just thought I would let you guys know about an added "Passenger Comfort Benefit" of the heat exchanger. Now the Shelby Heat Exchanger also offers Shelby GT500 and GT Supercharged passengers an Ergonomic Benefit. All kidding aside, it does in fact help the A/C system to function and cool better. Van Link to comment Share on other sites More sharing options...
ARMORINE Posted August 30, 2009 Report Share Posted August 30, 2009 Pun intended. As many of you know the dual puller fan Shelby Heat Exchanger pulls over 1,400 CFM that blows directly on the bottom of the A/C Condenser. I've had a number of people comment to me that their A/C gets very cold much quicker after installation. I too have noticed that my A/C gets cooler much faster. Just thought I would let you guys know about an added "Passenger Comfort Benefit" of the heat exchanger. Now the Shelby Heat Exchanger also offers Shelby GT500 and GT Supercharged passengers an Ergonomic Benefit. All kidding aside, it does in fact help the A/C system to function and cool better. Van would said heat exchanger work with a novi-2000? Link to comment Share on other sites More sharing options...
Revan Racing Posted August 30, 2009 Author Report Share Posted August 30, 2009 would said heat exchanger work with a novi-2000? Only works with air to water intercooled systems. Most of the Paxton's are air to air but I could be wrong. If it's air to water it will work. Link to comment Share on other sites More sharing options...
AstroDan Posted August 30, 2009 Report Share Posted August 30, 2009 Van: Can you give us an idea of installed (at SAI) cost for this? Dan Link to comment Share on other sites More sharing options...
Revan Racing Posted August 30, 2009 Author Report Share Posted August 30, 2009 Van:Can you give us an idea of installed (at SAI) cost for this? Dan Dan I do not know specifically what the labor rate is at SAI but I am fairly certain that they charge around 4.5 to 5 Hours for the complete install. Now that might have changed as they have fine tuned their installation procedures but it should be in that neighborhood from what I recall. Maybe somoene from SAI will see this and chime in. The more meticulous the installation the better in my opinion. If I ever have to have surgery of some sort I'm not looking for the guy that can do it the fastest! You're car is going to be awesome Dan. There is a convertible Blue Shelby GT sitting at the Ford dealer here in Florida. If it were a coupe I would probably be in a lot of trouble with Mrs. Dactyl. Van Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.