2nd2none Posted August 26, 2009 Report Share Posted August 26, 2009 did they go right on using the stock hangers? I got my exhaust today and started by pulling off the passenger side stock muffler. I removed both stock hangers in the process. Put the hangers on the new pipe and went to install. well, when I lined up the hanger back by bumper the exhaust tip was no where near center (was rubbed up against the plastic valance towards the center of the car. The other hangar was 1"+ away from even touching the frame rails to bolt it on. I called magnaflow and he said they might have placed the wrong model in my box. =( was sooo looking forward to having the new pipes on there today Link to comment Share on other sites More sharing options...
zeindog Posted August 26, 2009 Report Share Posted August 26, 2009 When i did mine they were a real PIA to do. Originally they looked as if they fit wrong but after some persuation they went on. I had to physically hang from the tips to bend the pipe down slightly so they wouldnt hit the plastic valence. It was worth the effort though cause they sound mean as heck. Link to comment Share on other sites More sharing options...
blkGT500nCA Posted August 26, 2009 Report Share Posted August 26, 2009 Mine fit like a glove. Are you sure you got the muffler hangers on correctly? Either that or you got the wrong part #'s. Good luck. You'll love the sound when you finally get them on. Link to comment Share on other sites More sharing options...
petmj1 Posted August 27, 2009 Report Share Posted August 27, 2009 I have a question about these muffler deletes from Magnaflow. Are the tips 4 inches or 3.5? I cannot seem to find any specs on that. Thanks in advance for any help or info! Link to comment Share on other sites More sharing options...
2nd2none Posted August 27, 2009 Author Report Share Posted August 27, 2009 yeah, hangers went back on exactly as they came off. the guy at americanmuscle.com was saying some exhausts wont work with stock hangers on the new Fords. sounds like garbage to me. why would someone make an exhaust for a specific vehicle and then make you buy new hangers so it fit?? either way he called me today and shipped out a new exhaust so hopefully next week I'll be able to put it on. the tips are 3.5" Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.