not4rent Posted August 2, 2009 Report Share Posted August 2, 2009 I bought a 2007 GT-H vert that was missing the SHELBY letters on the trunk. I have since purchased replacement letters and want to install but I do know the correct spacing for the letters. Also the letters (original and new) are stick on. Is there any special prep work to do before sticking the letters on to get maximum adhesion? I know to at least wash the car. Clean the area with rubbing alcohol? Any tips for either issue would be great. Thanks. Link to comment Share on other sites More sharing options...
stngfever Posted August 3, 2009 Report Share Posted August 3, 2009 This is what I got from Bud @ SAI Link to comment Share on other sites More sharing options...
tekheavy Posted August 3, 2009 Report Share Posted August 3, 2009 Here's another version c/o Grabber. Link to comment Share on other sites More sharing options...
ingram4868 Posted August 3, 2009 Report Share Posted August 3, 2009 Is it mrfarmdog that sells a template for mounting the letters perfectly? Link to comment Share on other sites More sharing options...
tekheavy Posted August 3, 2009 Report Share Posted August 3, 2009 Is it mrfarmdog that sells a template for mounting the letters perfectly? Yeah. Here's a recent thread from somebody that bought it. http://www.teamshelby.com/forums/index.php...ic=46120&hl Link to comment Share on other sites More sharing options...
QuickSilverShelby Posted August 4, 2009 Report Share Posted August 4, 2009 If you have a GT-H the correct layout is the one from Bud at SAI. the spacing of 3" off center followed by 2 7/8" between the lettering is correct for a GT-H. The other spacing supplied by Grabber is an alternative way to apply the letters BUT, it is not the correct spacing for a GT-H model. QSS Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.