bruces Posted March 20, 2009 Report Share Posted March 20, 2009 Bringing Shelby back into service have done the following check all fluid levels changed oil and filter, lubed entire suspension all moving pints greased sway bars checked tires battery charge ok ( Use tender) lubed shift linkage made sure all bolts tight check exhaust tight. waxed cleaned interior. Am I missing anything thoughts? Link to comment Share on other sites More sharing options...
Hardluck33 Posted March 20, 2009 Report Share Posted March 20, 2009 Bringing Shelby back into service have done the following check all fluid levels changed oil and filter, lubed entire suspension all moving pints greased sway bars checked tires battery charge ok ( Use tender) lubed shift linkage made sure all bolts tight check exhaust tight. waxed cleaned interior. Am I missing anything thoughts? Maybe clean your CAI. Steam clean your engine bay. Link to comment Share on other sites More sharing options...
shelbytexan Posted March 23, 2009 Report Share Posted March 23, 2009 Check the air in your tires. Link to comment Share on other sites More sharing options...
SGT/SC#0471 Posted March 24, 2009 Report Share Posted March 24, 2009 ;ast thing warm car up fully and test clutch by doing a three gear burnout! Link to comment Share on other sites More sharing options...
TClark1976 Posted March 25, 2009 Report Share Posted March 25, 2009 Steam Clean the Engine Bay? Where might someone do something like that? Link to comment Share on other sites More sharing options...
Hardluck33 Posted March 26, 2009 Report Share Posted March 26, 2009 Steam Clean the Engine Bay? Where might someone do something like that? A guy in Sanford NC that has a local detail shop does it--- I have never done it, my wife takes her car there for detailing. I am going to try it before I do a car show this year. Or do it yourself http://videos.streetfire.net/video/Want-to...n-bay_82051.htm Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.