Jump to content
TEAM SHELBY FORUM

Trouble with Replacement Parts for Stock SGT Exhaust?


Recommended Posts

I have had my passenger's side exhaust support bracket welds break off the muffler twice now. The first time, the Ford dealer found a replacement part for me form Shelby with the stock muffler and tip. Since that time, the service reps who were used to dealing with my Shelby GT have left. The reps that are now dealing with the car tell me that the replacement muffler, bracket, and tip combination are only sold as a kit from Ford Racing for a total of $564.

 

Can anyone help me understand how to point my Ford dealer to the right parts to replace the stock muffler / exhaust tip? Any help would be greatly appreciated.

Link to comment
Share on other sites

  • 2 months later...

I hope this is not a common problem with SGT mufflers. I have a pair on my Mustang and the driver's side hanger broke off. The hanger is still there, so I am going to see if it can be welded back on. Disappointing the quality is not better on these mufflers.

Link to comment
Share on other sites

I have had my passenger's side exhaust support bracket welds break off the muffler twice now. The first time, the Ford dealer found a replacement part for me form Shelby with the stock muffler and tip. Since that time, the service reps who were used to dealing with my Shelby GT have left. The reps that are now dealing with the car tell me that the replacement muffler, bracket, and tip combination are only sold as a kit from Ford Racing for a total of $564.

 

Can anyone help me understand how to point my Ford dealer to the right parts to replace the stock muffler / exhaust tip? Any help would be greatly appreciated.

 

 

This happened to mine, passenger side as well, and it was replaced under warranty. This should be replaced with no questions asked as part of your 3/36 Shelby Warranty Addendum.

 

 

-Jeff

 

Pics of mine:

DSCN1834.JPG

DSCN1835.JPG

DSCN1834.JPG

DSCN1835.JPG

Link to comment
Share on other sites

Mine broke off and the dealer welded it back on because they could not figure out how to get it warrantied. I called the number at the top of the shelby gt threads and talked to someone that told me to give that number to my dealer and have them call to get things rolling.

Link to comment
Share on other sites

Mine broke on the driver's side. Local muffler shop welded it back on.

 

I guess they're not very good mufflers...

 

 

Jer

Link to comment
Share on other sites

On the Mustang forums there are many reported instances of aftermarket FRPP M-5230-GTA mufflers breaking at the place the hanger meets the lip of the canister. It's just a bad design. Look where the stock GT hanger is attached: never heard of a breakage, and it's a good deal heavier than the GTA..

 

M_5230_GTA.jpgmustMuffTO.jpg

 

Vendors seem to have been good about replacing the broken mufflers.

M_5230_GTA.jpg

mustMuffTO.jpg

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...
...