pjsaleen266 Posted March 1, 2008 Report Share Posted March 1, 2008 I am fairly new to the sight. I have ordered a gt 500 and it is scheduled to be built March 10th. I am assuming that they come down the production line just like all other mustangs . Get a different motor and interior along they way . Then eventulally come off the line and go to the stripe shop. ??????? I am a documentation nut . I just sold a concourse trailored 70GT500 . So what kind of info can I get on my car? Does anyone have an inn to get production shots comming down the line? Any help would be appreciated. thanks Fran Link to comment Share on other sites More sharing options...
mciarochi Posted March 1, 2008 Report Share Posted March 1, 2008 After the model year 2008 is completed, you can get full documentation on your car and where it fits in the run directly from SVT. 1-800-FORD-788. http://www.svt.ford.com in the "newsroom". It was $40 for the certificate, $99 for a package. Don't call until they're done building all the '08 cars. Link to comment Share on other sites More sharing options...
svttim Posted March 2, 2008 Report Share Posted March 2, 2008 After the model year 2008 is completed, you can get full documentation on your car and where it fits in the run directly from SVT. 1-800-FORD-788. http://www.svt.ford.com in the "newsroom". It was $40 for the certificate, $99 for a package. Don't call until they're done building all the '08 cars. I am aware of the certificate, whats in the package? Link to comment Share on other sites More sharing options...
Michael Morris Posted March 2, 2008 Report Share Posted March 2, 2008 These are a few things that you can and should get from your dealer. DORA Invoice Vehicle Visibilty. ( after its delivered have them print the complete report) If I think of other things I will post. YOU can go to Flat Rock and watch the car go down the line. Most folks dont know that, but Im pretty sure you can. Then you can take all the pictures you want michael morris Link to comment Share on other sites More sharing options...
JonW Posted March 2, 2008 Report Share Posted March 2, 2008 These are a few things that you can and should get from your dealer.DORA Invoice Vehicle Visibilty. ( after its delivered have them print the complete report) I'd like my dealer to give me all that stuff Link to comment Share on other sites More sharing options...
captdave Posted March 2, 2008 Report Share Posted March 2, 2008 Watch your car go down the line. Has anyone done that? CaptDave Link to comment Share on other sites More sharing options...
Rarecat Posted March 2, 2008 Report Share Posted March 2, 2008 Actually, AAI is not open to the public, tours have to be pre-arraigned and escorted. With the way the cars are scheduled, you can't really time a tour to your build. Also, the car takes multiple shifts to complete, so sticking with it as it goes down the line is not feasible. Photos are not allowed. Been there, done that. Tour was great and very interesting. You could spot the Shelbys by the front brakes and front facia..... Link to comment Share on other sites More sharing options...
Michael Morris Posted March 2, 2008 Report Share Posted March 2, 2008 Actually, AAI is not open to the public, tours have to be pre-arraigned and escorted. With the way the cars are scheduled, you can't really time a tour to your build. Also, the car takes multiple shifts to complete, so sticking with it as it goes down the line is not feasible. Photos are not allowed. Been there, done that. Tour was great and very interesting. You could spot the Shelbys by the front brakes and front facia..... I talked to a guy few days ago that said that the did get pictures while his car went down the line. I think he said he called AAI and asked if he could and they let him, but you are proably right and he might have been making it up. michael morris Link to comment Share on other sites More sharing options...
Michael Morris Posted March 2, 2008 Report Share Posted March 2, 2008 I'd like my dealer to give me all that stuff YOUR dealer has it all! michael morris Link to comment Share on other sites More sharing options...
sharabi Posted March 2, 2008 Report Share Posted March 2, 2008 Good luck with that, hope you get a tour and photo shot of your car. Link to comment Share on other sites More sharing options...
ShelbyDude Posted March 2, 2008 Report Share Posted March 2, 2008 These are a few things that you can and should get from your dealer.DORA Invoice Vehicle Visibilty. ( after its delivered have them print the complete report) If I think of other things I will post. YOU can go to Flat Rock and watch the car go down the line. Most folks dont know that, but Im pretty sure you can. Then you can take all the pictures you want michael morris I don't think they will let you take pictures inside the plant. However, I think THEY will have someone takes pics and then send them to you after they have looked through them all to insure there is nothing in them they don't want to get out. Also, get a OASIS printed, and the vehicle specs printed. Link to comment Share on other sites More sharing options...
Michael Morris Posted March 2, 2008 Report Share Posted March 2, 2008 I don't think they will let you take pictures inside the plant. However, I think THEY will have someone takes pics and then send them to you after they have looked through them all to insure there is nothing in them they don't want to get out. Also, get a OASIS printed, and the vehicle specs printed. That might be what they told me. They went and watched it go down the line and someone GAVE them pics. michael morris Link to comment Share on other sites More sharing options...
phr3121 Posted March 2, 2008 Report Share Posted March 2, 2008 Great information & photos for what you are looking for.... The 2007 Ford Shelby GT500 Factory Production - Start to Finish: Link -> http://www.mustang50magazine.com/featuredv...d_photos_1.html The Ford Shelby GT500 (500hp) Engine Assembly: Link -> http://www.mustang50magazine.com/featuredv...d_photos_1.html Thanks boys! Photo: http://images.mustang50magazine.com/featur...ngine_build.jpg Link to comment Share on other sites More sharing options...
mikehart99 Posted March 2, 2008 Report Share Posted March 2, 2008 Thanks for the gift to see inside the plant. Mikehart Link to comment Share on other sites More sharing options...
sharabi Posted March 3, 2008 Report Share Posted March 3, 2008 Link to comment Share on other sites More sharing options...
Snaky Posted March 3, 2008 Report Share Posted March 3, 2008 After the model year 2008 is completed, you can get full documentation on your car and where it fits in the run directly from SVT. 1-800-FORD-788. http://www.svt.ford.com in the "newsroom". It was $40 for the certificate, $99 for a package. Don't call until they're done building all the '08 cars. Hmmm, isn't there a page where I can order? I think very hard to do it by phone from overseas. But I would be very interested to know when my car exactly was born and to receive some oder information about it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.