Jump to content
TEAM SHELBY FORUM

Lower Billet Grille Instructions


Recommended Posts

Hi all!!!!!! Its me again!!!

 

Here are the instructions for the lower billet grille. Pictures will soon follow.

 

First, remove the two lower outer “faux” grille pieces. They will pop out. Look at the new lower grille insert, you will see on the brace a hole on each side. This is the hole where you will need to drill later. Now take the grille and place it in the opening, going in from behind the fascia. Now drill through the hole in the brace and through the fascia. Use 2 pop rivits to hold it in place. You can use a 1/8 by 1/2 inch pop rivit.

Now, snap back on the two “faux” grille pieces. The lower grille insert is now completed

Link to comment
Share on other sites

  • 1 year later...
Hi all!!!!!! Its me again!!!

 

Here are the instructions for the lower billet grille. Pictures will soon follow.

 

First, remove the two lower outer “faux” grille pieces. They will pop out. Look at the new lower grille insert, you will see on the brace a hole on each side. This is the hole where you will need to drill later. Now take the grille and place it in the opening, going in from behind the fascia. Now drill through the hole in the brace and through the fascia. Use 2 pop rivits to hold it in place. You can use a 1/8 by 1/2 inch pop rivit.

Now, snap back on the two “faux” grille pieces. The lower grille insert is now completed

 

 

Thanks for posting this!

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...
...